Arctic Silver Ceramique 2 Premium High-Density Thermal Compound
The high-density, ceramic-based thermal compound specifically designed for modern high-power CPUs and high-performance heatsinks or water-cooling solutions.
Features
- Excellent value for money
- Does not separate, run, migrate or bleed
- Made from non-conductive materials
Tri-Linear Ceramique Content
Like the original Ceramique, Ceramique 2 uses only ceramic fillers so it is neither electrically conductive nor capacitive. The tri-linear composite of aluminium oxide, zinc oxide and boron nitride allows the thinnest possible bond line with modern processors, heatsinks and electronics. Critically-sized particles and new ultra-high shear mixing techniques maximise Ceramique 2’s thermal performance and help maintain a stable homogeneous suspension. This exclusive combination provides performance exceeding most metal based compounds.
Polysynthetic Suspension Fluid
A new oil mixture, improved thermal filler properties and increased particle deagglomeration, dispersal and density enhance Ceramique 2’s thermal performance and overall stability. The third generation polysynthetic suspension fluid combines advanced synthetic oils to maximise wetting and stability while allowing a higher density of thermally conductive fillers.
Excellent Stability
Ceramique 2 is engineered to not separate, run, migrate, or bleed.
Electrical Insulator
Ceramique 2 does not contain any metal or other electrically conductive materials. It is a pure electrical insulator, neither electrically conductive nor capacitive.
Performance
2 to 10 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode embedded in the CPU core.
Innovative Dispenser
The amount of compound remaining in the 2.7-gram syringe is easy to determine as the rear of the plunger is perfectly flush with the flange when the syringe is empty.
Easy Clean Up
Ceramique 2 can easily be cleaned from CPUs and heatsinks with ArctiClean, isopropyl alcohol or any of the cleaners listed in the product instructions.
Specifications | Ceramique 2 2.7g |
---|---|
Average Particle Size | <0.36 microns <0.000014 inch (70 particles lined up in a row equal 1/1000th of an inch) |
Temperature Limits | Peak: –150°C to >185°C Long-Term: –150°C to 130°C |
Coverage Area | Approximately 9.2cc * |
Warranty | 24 months |
EAN barcode | 0832199002080 |
- *At a layer 0.003” thick
Specifications | Ceramique 2 2.7g |
---|---|
Average Particle Size | <0.36 microns <0.000014 inch (70 particles lined up in a row equal 1/1000th of an inch) |
Temperature Limits | Peak: –150°C to >185°C Long-Term: –150°C to 130°C |
Coverage Area | Approximately 9.2cc * |
Warranty | 24 months |
EAN barcode | 0832199002080 |
- *At a layer 0.003” thick
Customer Reviews
Great TIM
Actually using this on my xbox 360, makes a good difference, xbox’s fan speed/noise is determined via temps. My fan noise has at least dropped 50%, so temps must be quite a bit lower. Saying that anything is better than the stuff Microsoft use. I will test it on my xeon CPU eventually and compare it to my IC Diamond 24 which is what I use as it is the best but expensive.
Product Resources
Top CPU Cooling Accessories
Noctua NT-H2 Pro-Grade Thermal Paste, 3.5g
Arctic Silver AS5 12g, High-Density Polysynthetic Silver Thermal Compound
Arctic Silver AS5 3.5g, High-Density Polysynthetic Silver Thermal Compound
Noctua NA-SCW1 Cleaning Wipes for Thermal Paste (20 Pieces)
Gelid GP Extreme 1.5mm 80x40 Thermal Pad
Gelid GP Extreme 2.0mm 80x40 Thermal Pad
Noctua NT-H2 Pro-Grade Thermal Paste, 10g
Gelid GP Ultimate 1pc 0.5mm 90x50 Thermal Pad
Gelid GP Extreme 1.0mm 80x40 Thermal Pad
Gelid GC-3 3.5g Extreme Performance Thermal Compound